|
DURA MRA (C) PRODUCTS DETAILS DURA MRA is a chemical release agent suitable for shutters and Moulds. Clean release gives a fair faced concrete surface. It is manufactured using a hydrocarbon vehicle blended with chemically active release agent. USAGE DURA MRA is suitable for all types of shutters and moulds. DURA MRA can be applied to steel, timber & plywood moulds Application Guidelines: When using for the first time spray DURA MRA on the shutters while erecting them, and then just before concreting. There after DURA MRA can be sprayed just after deshuttering and cleaning. During initial uses new commercial ply shutters tend to be absorbtive. Hence it is necessary that new ply shutters are sprayed just before concreting also. DURA MRA reacts chemically with cement in such a manner that excellent release properties are imparted to the treated face of the shutters and moulds. Concrete casted with DURA MRA on the shutters has smooth, hard uniform and light coloured finish. The adhesion of subsequent finishes such as renders, paints or textured coating is unaffected by use of DURA MRA Advantages: DURA MRA gives very good shutter releasing properties. DURA MRA being almost clear in appearance does not give ugly appearance to the applied mould & also to to the finished concrete surface unlike the MRAs manufactured using waste by products DURA MRA is designed to ensure no damages to the shutters and to the concrete. Does not leave any ugly stains on the Concrete surface Application of conventional mould releasing oils is tedious and time consuming. DURA MRA can be sprayed saving time and labour or can also be applied by brush
|
